The next generation of lithium-ion battery materials must have characteristics of high specific capacity, high power, and reasonable price for applications. Our work has achieved breakthrough results in the lithium excess non-stoichiometric material and found that it can operate at a high voltage of 4.6V. Moreover, the specific capacity of this new lithium-ion battery cathode material is greater than 200 mAh/g.

The developed technology is a cross-platform interface demonstrates its capabilities via the machining center VP2012. The interface is able to synchronize operating systems for diversified controllers. It integrates multiple functions, such as intelligent thermal balance, intelligent vibration analysis, and artificial neural network learning responsive technique. The developed technology advances software, hardware and firmware of a MIT machining center, setting up a representative example of smart machine for local manufactures, even the whole industry.

1. Toward All Slot-Die Fabricated High Efficiency Large Area Perovskite Solar Cell Using Rapid Near Infrared Heating in Ambient Air 2. Fault Current Indicator 3. Plasma Sprayed Metal-supported Solid Oxide Fuel Cell 4. Sulfide-based Solid-state Lithium-ion Battery with High Capacity and Safety

In this invention, the fluorinated graphene(FG) is obtained by the fluorination of electrochemically exfoliated graphene (ECG), which is found to be a one-step approach for the scalable preparation of FG. The precursor with fluorine atoms is mixed with the ECG followed by applying lower energy to produce the fluorinated graphene. This process demonstrates an eco-friend and safe as well as scalable features. We have demonstrated their multi-functional applications on surface coatings, including the outperformance anticorrosion passivation, hydrophobic surface with ultra-strong adhesion, and high safety energy storage device. This technology provided a new strategy for next-generation functional and atomic layered coatings.

A composite multi-cation high-entropy catalyst, which integrates the concept of high-entropy compounds into traditional metal oxide catalysts, such as spinel, perovskite, and fluorite structure. By the combination of photoelectric, piezoelectric, and ferroelectric materials with the characteristic high-entropy oxides. The high-entropy composite piezoelectric catalysts could become a promising technology for clean energy applications, such as organic dye degradation and hydrogen generation.

"Tool replacementtool life diagnosis" in smart manufacturing is a key link between the quality of workpiecethe efficiency of the manufacturing process, so it is an indicator of the operating efficiency of machine tools. This technology combines on-site monitoring data, laboratory analysisdeep learning to provide best tool selectionprocessing parameter combinations for

Image that your cell phone can be self-poweredable to self-healing after damagerobots in Sci-fi movie have self-poweredself-healable skins. Here, we present the first energy-harvesting triboelectric artificial skin that is entirely, intrinsically,autonomously self-healablesimultaneously highly transparentextraordinarily stretchableable to drive via self-generating

Responding the government’s policy of “circular economy”. The project is to manufacture high value and energy saving construction material (lightweight aggregate) by using Taiwan environmental and industrial waste, such as paper sludge, textile sludge, organic waste solvent from semiconductor industry, and reservoir sludge, etc. Based on fully recyclable concept to create real benefits for domestic ecological environment.

Conventional buildings use beambrace members to dissipate seismic energy. However, these members may cause residual deformation of buildings under large earthquakes, which affects the building seismic performanceincreases the difficulty of reuse after earthquakes. Therefore, a novel earthquake-resisting member "Dual-Core Self-Centering Brace, DC-SCB” was developed. The DC-SCB uses tendons to provide the elastic restoring forcea friction devicesteel bars to provide energy dissipation so that the building can return to the original position after major earthquakes. The DC-SCB significantly reduces the residual deformationrepair cost of the building after earthquakes, also reducing the large lateral displacementcollapse of the building.

Multi-axis force/torque sensors are key components of precision machinesrobot arms. Development of the multi-axis force/torque sensor is a popular research topic in Taiwan. This research developed design methods, calibration machinescalibration algorithms for multi-axis force/torque sensors. These efforts contribute the enhancement of precision of 0.20 (1.25 times than commercialize pro

The present invention relates to a building natural energy conversion ventilation device, which has cleaning indoor and outdoor air, also has air-conditioning cooling heating supplies, which can make the intake air closer to the dew point temperature of the indoor side air after heat exchange, thereby reducing the heat load of the heat source unit, Enhance its operating efficiency, achieve energy saving avoid waste heat emission.

The technology realizes a perovskite nanocrystal-polymer composite material, which has extremely high stability at room temperaturehigh temperature. It can be used for 3D printing, shaped into fluorescent microfilaments,can also be used for white light-emitting diodes. The application of this air-stabile perovskite nanocrystal-polymer composite material in the 3D printing industry, texti

The goal of this project is to study "low-temperature magnesium hydrogen storage materials and energy storage applications". Mg hydrogen storage materials with a hydrogen storage capacity of 5.0 wt% is developed,and their dehydrogenation rate at 250℃ will be significantly enhanced using a forcible pump. The Mg hydrogen storage powders are inserted into a tank for cyclic hydrogenation-dehydrogenation tests. The H2 gas desorbed from the tank is supplied to a high-temperature proton exchange membrane fuel cell (HT-PEMFC,160℃) for power generation.

Directly writing 3D structures into supporting mediums is a relatively new developing technology. The liquid-like solid (LLS) materials are developed as supporting mediums, that possesses the self-healing ability and tunable yield stress. Because the components of this emulsion glass are mostly water and oil, it exhibits chemical stability when exposed to UV radiation and high temperature. Based on the above features, this emulsion glass can be regarded as a new kind of LLS material for supporting mediums.

The self-healing ultra-high-performance concrete is a green construction material. It has the key characteristics of self-healing ability, high deformability, and ultra-high strength. The material composition contains a high proportion of by-products from industrial manufacturing. The particle packing density of the developed material is optimized to make this new multi-functional concrete material also have the ability of self-healing and deformability.

The innovative microbial wastewater treatment technology of our team can effectively reduce the COD, BOD, total nitrogen and total phosphorus in livestock wastewater to the emission standards in a short period of time, and the generated microorganisms can be developed for feed additives and organic fertilizers. In terms of industrial wastewater, this technology can also effectively clean petrochemical, ammonia nitrogen and heavy metal wastewater by degrading COD and ammonia nitrogen even adsorbing heavy metals, showing the excellent treatment performances.

With the use of E. coli expression system, capsid protein assembly in vitro, X-ray photoprotein crystallographycryo-electron microscope, the T=3 capsid structure of white tail disease viruses for shrimps has been resolved successfully, such that an entire model for capsid structure of virus could be provideda mechanism for viral assemblyinfection could be understood.

NCREE combined on-siteregional EEW to provide the hybrid EEW for the industries. As results, the fastaccurate earthquake warning message can be provided to the industry with low cost (No cost for the EEW hardware, only the receiverdisaster reduction system). Industry can combine the Hybrid EEW with their existing serviceprovide one more disaster service to their customer.

This technique is based on Ultrahigh Bit-rate Lightweight X-band Transceiver. Combining the satelline, user’s cell phones,the transceiver mentioned, we proposed a multi-user two-way communication system with extremely high bit-rate.

The objective of this study is to develop a high energetic ignition powder which combines the features of nano-aluminum (nAl) powderNitrocellulose (NC)Ammonium perchlorate (AP). The study covers from the deployment of the igniter using above three materials, the research of the ignition mechanismthe application in engineering field.

The ion thruster uses metallic ions as the propellant. By using the concept of electron-beam physical vapor deposition processing, a zinc target is bombarded, heated, evaporated,ionized by magnetron e-beam bombardments. Zinc ions are accelerated by an electric fieldthus provides thrusts.

ModularizedThrottleable Hydrogen Peroxide Hybrid Rocket Engine with Direct-Drive Thrust Vector Control Technology

Smart evacation supporting system is based on scenarios to exercise different conditions of evcuation operation. And, the data analysis algorithm will recommend a evacution route for different users according to the conditions. Finally, the system provide real-time evacution informatton through LINE channel.

The aim of the present study is to develop an operational forecasting system for flash floods in mountainous areas in Taiwan by integrating numerical meteorological, hydrologicalhydrodynamic modelsa visualization computer program.

-

With rapid evolution of Moores lawsemiconductor technology nodes down to sub-10 nm, advanced devicematerial technologies capable of Å accuracy are highly demanded. Thus we developed atomic layer technologies including atomic layer deposition, atomic layer annealing, atomic layer epitaxy,atomic layer etching, etc. for extreme control of materialsstructures with Å precision.

High-accuracy 3D sensingAI image processing system for constructing high-quality immersion 3D image for AR/VR. Chaotic Lidar with APD arrayTOF sensors supports millimeter-accuracyinterference-avoiding capability. High-performance CNN processor supports high-performancelow DRAM bandwidth computations for various image AI applications.

The objective of this project is to develop a portablewireless urine detection systemplatform for prevention of cardiovascular disease. The main idea is to develop a system-on-chip, a microelectrodemicrochannel chip to detect biomarkers concentrations in urine. And then, it will be wirelessly transmitted to a smart application platform to evaluate user’s cardiovascular status.

Within 10 years, Taiwan will become a super senior society with the proportions in silver hairs of more than 20. Thus, a high-throughputsmart platform with bio-physiology-marker panels is developed for PD progression by combining the bio-medicalphysical sensors, SPRsmart circuit design, leading to a new UPDRS for a more accurateearly diagnosis of a physician.

This project is to implement a 37-40 GHz mmWave transceiver supporting 4096 QAM modulationis utilized for long-distance 4K/8K real-time image data transmission. The 37-40GHz band is divided into 500 channels,the AI technology is used for the TRx to carry out digital calibration. The achievement is TRx module (SoC/SiP)would be installed on the UAV for wildlife resources monitoring.