進階篩選

Technical category
技術研發單位
  • 共有:63筆資料
  • 顯示:
  • 筆商品
    • Vehicle LiDAR using CMOS Single-photon Detectors

      Smart machinerynovel materials FutureTech Vehicle LiDAR using CMOS Single-photon Detectors

      This project is used for advanced driver assistance systems (ADAS)automatic driving. At present, our project will use a more sensitive CMOS single photon detector array to reduce the number of photons required for detection to less than ten, in order to break through the cost barriers of applications of LiDARestablish low-cost, high-performance LiDAR modules.
    • Broadband Ocean Bottom Seismometer (BBOBS)

      Smart machinerynovel materials FutureTech Broadband Ocean Bottom Seismometer (BBOBS)

      The Broadband Ocean Bottom Seismometer(BBOBS) is a marine instrument that collects natural earthquakesartificial sound sources. BBOBS project has been leading by TORI, Academic Sinica,National Sun Yat-Sen University from designing, testing to success. BBOBS have been deployedrecovered in several research cruisesobtained the great results.
    • Technology of anthropomorphic robotic armintelligent grasping

      Smart machinerynovel materials FutureTech Technology of anthropomorphic robotic armintelligent grasping

      Through patented wearable sensor fusion technology, human 3D motions can be captured in real-time which allow 7-DOF robotic armdexterous robotic hand to perform anthropomorphic motiongrasping action. Integrated with eye-in-hand visual module, the adaptive gripper can intelligently decide optimal grasping strategy to ensure success grasping of arbitrary shape of objects in smart manufacturing applications.
    • Ultrasonic toolholder module

      Smart machinerynovel materials FutureTech Ultrasonic toolholder module

      The ULTRASONIC technologythe Non-contact power transmission technology offers high qualityefficient machining for ceramicother brittle materials. Depending on the workpiece requirements, our product allows higher feedinfeed, which increases machining efficiency for at least 30, longer tool lifesignificantly better surface finishes.
    • Beryllium-free multi-element copper alloy

      Smart machinerynovel materials FutureTech Beryllium-free multi-element copper alloy

      For the working places where have the risk of burningexplosion, non-sparking tools are important safety tools. They are made of hardest Cu-Be alloys. However, Be is very expensivepoisonous. To overcome this, we develop Be-free copper alloys which have high hardness for tools. In Taiwan, we have steel-tools industry. To have higher profit, it is promising to produce such Be-free non-sparking tools.
    • Preparation of biomimetic omniphobic porous membrane for application in membrane contactor

      Smart machinerynovel materials FutureTech Preparation of biomimetic omniphobic porous membrane for application in membrane contactor

      Inspired by the surface of the insect skin, a special nanostructure was grown on the membrane surface that is the key for omniphobic membrane which is able to treat low surface energy wastewater. The technique of omniphobic membrane combined with membrane contactors has the opportunity to become a trend in the future for water resources, carbon capture, valuable minerals recoveryhigh-purity drug crystallization.
    • Residual-glue-free biomimetic dry adhesives

      Smart machinerynovel materials FutureTech Residual-glue-free biomimetic dry adhesives

      Biomimetic adhesive has some characteristics: no residual glue, anisotropic adhesion, easy to be peeledstuckrepeated. Its adhesion could be adjusted depend on the application. The adhesive can be applied but not limited in wafer processing, movement of optoelectronic materials, 3C product assembly, daily-used fixation,producing a protective film for attaching to an object surface.
    • Probabilistic Seismic Hazard Analysis (PSHA)、Epidemic-Type Aftershock Sequence (ETAS)

      Smart machinerynovel materials FutureTech Probabilistic Seismic Hazard Analysis (PSHA)、Epidemic-Type Aftershock Sequence (ETAS)

      After the publication of TEM PSHA2015. Updated version to the TEM PSHA2019, we considered updated seismogenic structure database, newly identified structure with 3D geometry, an earthquake catalog to 2016, state-of-the-art seismic models,site amplification factors. The ETAS (Epidemic-Type Aftershock Sequence) model aims to forecast the aftershocks from a large mainshock in real-timereduce its effectiveness.
    • Smart glove with soft force sensors for virtual reality somatosensory equipment training

      Smart machinerynovel materials FutureTech Smart glove with soft force sensors for virtual reality somatosensory equipment training

      The smart glove was made by soft force sensor with the multi-walled carbon nanotube cast in the mesh structurecombined with an interdigitated electrode together, then used AC/DC conversionspace calculation to establish the interactive virtual reality(VR) somatosensory system under the wireless. The recipient can achieve the same feedback as the demonstrator's behaviorskills in VR.
    • Thermoelectric Ever-Charge Portable Charger

      Smart machinerynovel materials FutureTech Thermoelectric Ever-Charge Portable Charger

      This technology develop a “Thermoelectric Ever-Charge Portable Charger” for the applications in auxiliary charging of consumer electronicsfast self-charging for outdoor sensors. Technically, a sputtering depositiona semiconductor photolithography technique are combined to fabricate p-n materialsconnection procedures. The thermoelectric performance of the device is further optimized through a low-temperature heat treatment.
    • Devicemethod for recyclingreuse of reverse osmosis wastewater

      Smart machinerynovel materials Innotech Expo Devicemethod for recyclingreuse of reverse osmosis wastewater

      The novel aM device (AC@SGO) is capable of removing extra, unwantedtoxic ions. Particularly it can replace the RO water purifier with even better performance. In addition, the aM device can also be used in industrial RO wastewater recycling with a minimum maintenance necessity. The aM device with the advantages of relatively low costmultiple functions would have a high business competitiv
    • AIBig Data Analytics for Energy SavingChiller Configuration Optimization

      Smart machinerynovel materials Innotech Expo AIBig Data Analytics for Energy SavingChiller Configuration Optimization

      This technique employs AIbig data analytics to precisely forecast cooling load demandestimate efficiency of different chiller combinations. Time-of-Use Pricingoptimal chiller load interval are also considered for practical needs. Decision supports of optimal chiller configuration are provided to enhance energy conservation.
    • Safety device for preventing inclined falling during bicycle riding

      Smart machinerynovel materials Innotech Expo Safety device for preventing inclined falling during bicycle riding

      When the bicycle is tilted, the anti-dumping support rod moves to the outside of the frame due to gravitycentrifugal force to form a large bottom area,the stability is high. The warning lighthorn of the support rod can prevent the rear vehicle from chasinghave high safety. With the use of the clamping fixture, it can be installed on various types of bicycles to have high market
    • passive radiative cooling inorganic coating

      Smart machinerynovel materials Innotech Expo passive radiative cooling inorganic coating

      This technology uses the low-carbon geopolymer material & high emission powder to make the passive radiative cooling inorganic coating. Besides, all raw materials are from easily-gained oreindustrial by-products,the multi-color appearance is also developed. Notably, for decreasing the heat island effect, this coating is feasible to transmit heat into radiation that can be throughout t
    • The Study of Chips Characteristics on Tool Life Influence

      Smart machinerynovel materials Innotech Expo The Study of Chips Characteristics on Tool Life Influence

      In the machining, the cutting between the toolthe material produces chips. Cutting parameterstool wear can affect the colorshape of the chips. According to the observer's experience, the cutting conditions for chip formation can be known. It means that using cutting chips to decide wear of cutting tools is theoretically a feasible method.
    • Sky window for sun light modulation

      Smart machinerynovel materials Innotech Expo Sky window for sun light modulation

      The proposed technology erects the solar panel in installation. The reflector can be adjusted to modulate the percentage of sunlight for photovoltaic generationillumination in corresponding to the change of weatherseason.
    • Conversion of water caltrop husk into high-value carbon-based products

      Smart machinerynovel materials Innotech Expo Conversion of water caltrop husk into high-value carbon-based products

      This product-oriented technology is to utilize water chestnut husk as a starting precursor in the production of activated carbon using physical activation process.The resulting activated carbon is characteristic of its high microporosity, high BET surface areatotal pore volume, which is superior to commercial activated carbon products.
    • Energy-saving GlassMethod of Manufacturing the Same

      Electronic & Optoelectronics Innotech Expo Energy-saving GlassMethod of Manufacturing the Same

      Energy-saving glass is realized using nano-imprinting to fabricate a periodic nano-structures. The glass can suppress the transmission of ultraviolet light such that people are not harmed. The transmission of infrared is largely reduced to lower air-conditioning. On the other hand, transmission is not deteriorated in the visible range to prevent the increment of illumination cost.
    • Exhaust cabinet with air curtain isolation

      Smart machinerynovel materials Innotech Expo Exhaust cabinet with air curtain isolation

      The water two-phase change is used for energy conversion,the average air flow rate of the invention can be completely isolated as long as 0.2 m/sec, which can save 6RT freezing capacity equivalent to 6KW energy consumption compared with the conventional smoke exhausting cabinet body, effectively interacting with the outside world. Space isolation to avoid leakage of high pollution toxic gases
    • Range hood with wisdom sensing

      Smart machinerynovel materials Innotech Expo Range hood with wisdom sensing

      The smoke removal device with smart detection has the capability of gas detectionindoor air circulation. The system is internally equipped with a sensing device. If an abnormal PM2.5 valuea high concentration of dangerous gas is detected, the fan can be automatically activated immediately to quickly filter the air,both preventivemonitoring functions can be achieved.
    • Self-powered fan-type dehumidifier

      Smart machinerynovel materials Innotech Expo Self-powered fan-type dehumidifier

      The anhydrous calcium chloride absorbs the water contents in the airturns them into liquid water. The liquid water then becomes the electrolyte to initiate the electrochemical reaction of the metal-air fuel cell. The electricity generated from the fuel cell is used to power the ventilation fan inside a wardrobe cabinetcreates its circulation with outside atmosphere.
    • Oil water separation device

      Smart machinerynovel materials Innotech Expo Oil water separation device

      A catalytic thin film was deposited on a porous substrate by a liquid phase method for the synthesis of CNTs as a superhydrophobicsuperoleophilic membrane which is non-toxicenvironmental friendly. The filter membrane was installed on the oil-water separation device for operation without power it’s an important technology for recycling economyenvironmental protection.
本網站使用您的Cookie於優化網站。繼續瀏覽網站即表示您同意本公司隱私權政策,您可至隱私權政策了解詳細資訊。