進階篩選

Technical category
技術研發單位
    • Green Energy Technology Joint Research and Development Program

      Smart machinerynovel materials FutureTech Green Energy Technology Joint Research and Development Program

      1. Toward All Slot-Die Fabricated High Efficiency Large Area Perovskite Solar Cell Using Rapid Near Infrared Heating in Ambient Air 2. Fault Current Indicator 3. Plasma Sprayed Metal-supported Solid Oxide Fuel Cell 4. Sulfide-based Solid-state Lithium-ion Battery with High Capacity and Safety
    • Advancement Project for Smart Machinery and Aerospace Industries in Central and Southern Taiwan

      Smart machinerynovel materials FutureTech Advancement Project for Smart Machinery and Aerospace Industries in Central and Southern Taiwan

      The developed technology is a cross-platform interface demonstrates its capabilities via the machining center VP2012. The interface is able to synchronize operating systems for diversified controllers. It integrates multiple functions, such as intelligent thermal balance, intelligent vibration analysis, and artificial neural network learning responsive technique. The developed technology advances software, hardware and firmware of a MIT machining center, setting up a representative example of smart machine for local manufactures, even the whole industry.
    • Lithium battery energy storage system development and new generation of solid-state battery materials

      Smart machinerynovel materials FutureTech Lithium battery energy storage system development and new generation of solid-state battery materials

      The next generation of lithium-ion battery materials must have characteristics of high specific capacity, high power, and reasonable price for applications. Our work has achieved breakthrough results in the lithium excess non-stoichiometric material and found that it can operate at a high voltage of 4.6V. Moreover, the specific capacity of this new lithium-ion battery cathode material is greater than 200 mAh/g.
    • Safety device for preventing inclined falling during bicycle riding

      Smart machinerynovel materials Innotech Expo Safety device for preventing inclined falling during bicycle riding

      When the bicycle is tilted, the anti-dumping support rod moves to the outside of the frame due to gravitycentrifugal force to form a large bottom area,the stability is high. The warning lighthorn of the support rod can prevent the rear vehicle from chasinghave high safety. With the use of the clamping fixture, it can be installed on various types of bicycles to have high market
    • The Study of Chips Characteristics on Tool Life Influence

      Smart machinerynovel materials Innotech Expo The Study of Chips Characteristics on Tool Life Influence

      In the machining, the cutting between the toolthe material produces chips. Cutting parameterstool wear can affect the colorshape of the chips. According to the observer's experience, the cutting conditions for chip formation can be known. It means that using cutting chips to decide wear of cutting tools is theoretically a feasible method.
    • Self-healing ultra-high performance concrete

      Smart machinerynovel materials FutureTech Self-healing ultra-high performance concrete

      The self-healing ultra-high-performance concrete is a green construction material. It has the key characteristics of self-healing ability, high deformability, and ultra-high strength. The material composition contains a high proportion of by-products from industrial manufacturing. The particle packing density of the developed material is optimized to make this new multi-functional concrete material also have the ability of self-healing and deformability.
    • UV-resistant Self-healing Emulsion Glass as a New Liquid-like Solid Material for 3D Printing

      Smart machinerynovel materials FutureTech UV-resistant Self-healing Emulsion Glass as a New Liquid-like Solid Material for 3D Printing

      Directly writing 3D structures into supporting mediums is a relatively new developing technology. The liquid-like solid (LLS) materials are developed as supporting mediums, that possesses the self-healing ability and tunable yield stress. Because the components of this emulsion glass are mostly water and oil, it exhibits chemical stability when exposed to UV radiation and high temperature. Based on the above features, this emulsion glass can be regarded as a new kind of LLS material for supporting mediums.
    • Low-temperature magnesium hydrogen storage materials and energy storage applications

      Smart machinerynovel materials FutureTech Low-temperature magnesium hydrogen storage materials and energy storage applications

      The goal of this project is to study "low-temperature magnesium hydrogen storage materials and energy storage applications". Mg hydrogen storage materials with a hydrogen storage capacity of 5.0 wt% is developed,and their dehydrogenation rate at 250℃ will be significantly enhanced using a forcible pump. The Mg hydrogen storage powders are inserted into a tank for cyclic hydrogenation-dehydrogenation tests. The H2 gas desorbed from the tank is supplied to a high-temperature proton exchange membrane fuel cell (HT-PEMFC,160℃) for power generation.
    • Air-stable luminescent organic-inorganic perovskite nanocrystal-polymer composites

      Smart machinerynovel materials FutureTech Air-stable luminescent organic-inorganic perovskite nanocrystal-polymer composites

      The technology realizes a perovskite nanocrystal-polymer composite material, which has extremely high stability at room temperaturehigh temperature. It can be used for 3D printing, shaped into fluorescent microfilaments,can also be used for white light-emitting diodes. The application of this air-stabile perovskite nanocrystal-polymer composite material in the 3D printing industry, texti
    • Breakthroughsachievements of key technologies of six-axis force/torque sensor

      Smart machinerynovel materials FutureTech Breakthroughsachievements of key technologies of six-axis force/torque sensor

      Multi-axis force/torque sensors are key components of precision machinesrobot arms. Development of the multi-axis force/torque sensor is a popular research topic in Taiwan. This research developed design methods, calibration machinescalibration algorithms for multi-axis force/torque sensors. These efforts contribute the enhancement of precision of 0.20 (1.25 times than commercialize pro
    • Dual-Core Self-Centering Energy Dissipation Brace

      Smart machinerynovel materials FutureTech Dual-Core Self-Centering Energy Dissipation Brace

      Conventional buildings use beambrace members to dissipate seismic energy. However, these members may cause residual deformation of buildings under large earthquakes, which affects the building seismic performanceincreases the difficulty of reuse after earthquakes. Therefore, a novel earthquake-resisting member "Dual-Core Self-Centering Brace, DC-SCB” was developed. The DC-SCB uses tendons to provide the elastic restoring forcea friction devicesteel bars to provide energy dissipation so that the building can return to the original position after major earthquakes. The DC-SCB significantly reduces the residual deformationrepair cost of the building after earthquakes, also reducing the large lateral displacementcollapse of the building.
    • Development of cutting knowledge base to enhance machine tool performance

      Smart machinerynovel materials FutureTech Development of cutting knowledge base to enhance machine tool performance

      "Tool replacementtool life diagnosis" in smart manufacturing is a key link between the quality of workpiecethe efficiency of the manufacturing process, so it is an indicator of the operating efficiency of machine tools. This technology combines on-site monitoring data, laboratory analysisdeep learning to provide best tool selectionprocessing parameter combinations for
    • Composite High-Entropy Oxide of Piezocatalyst in Organic Dye Degradation

      Smart machinerynovel materials FutureTech Composite High-Entropy Oxide of Piezocatalyst in Organic Dye Degradation

      A composite multi-cation high-entropy catalyst, which integrates the concept of high-entropy compounds into traditional metal oxide catalysts, such as spinel, perovskite, and fluorite structure. By the combination of photoelectric, piezoelectric, and ferroelectric materials with the characteristic high-entropy oxides. The high-entropy composite piezoelectric catalysts could become a promising technology for clean energy applications, such as organic dye degradation and hydrogen generation.
    • High-value recycling waste materials to produce lightweight aggregate

      Smart machinerynovel materials FutureTech High-value recycling waste materials to produce lightweight aggregate

      Responding the government’s policy of “circular economy”. The project is to manufacture high value and energy saving construction material (lightweight aggregate) by using Taiwan environmental and industrial waste, such as paper sludge, textile sludge, organic waste solvent from semiconductor industry, and reservoir sludge, etc. Based on fully recyclable concept to create real benefits for domestic ecological environment.
    • Mass production technology of fluorinated graphene and its multi-functional applications on surface coating

      Smart machinerynovel materials FutureTech Mass production technology of fluorinated graphene and its multi-functional applications on surface coating

      In this invention, the fluorinated graphene(FG) is obtained by the fluorination of electrochemically exfoliated graphene (ECG), which is found to be a one-step approach for the scalable preparation of FG. The precursor with fluorine atoms is mixed with the ECG followed by applying lower energy to produce the fluorinated graphene. This process demonstrates an eco-friend and safe as well as scalable features. We have demonstrated their multi-functional applications on surface coatings, including the outperformance anticorrosion passivation, hydrophobic surface with ultra-strong adhesion, and high safety energy storage device. This technology provided a new strategy for next-generation functional and atomic layered coatings.
    • Using innovative microbial technologies as a high-efficiency valued-added total solution for industrial livestock wastewater treatment

      Smart machinerynovel materials FutureTech Using innovative microbial technologies as a high-efficiency valued-added total solution for industrial livestock wastewater treatment

      The innovative microbial wastewater treatment technology of our team can effectively reduce the COD, BOD, total nitrogen and total phosphorus in livestock wastewater to the emission standards in a short period of time, and the generated microorganisms can be developed for feed additives and organic fertilizers. In terms of industrial wastewater, this technology can also effectively clean petrochemical, ammonia nitrogen and heavy metal wastewater by degrading COD and ammonia nitrogen even adsorbing heavy metals, showing the excellent treatment performances.
    • Building energy conversionventilation device

      Smart machinerynovel materials FutureTech Building energy conversionventilation device

      The present invention relates to a building natural energy conversion ventilation device, which has cleaning indoor and outdoor air, also has air-conditioning cooling heating supplies, which can make the intake air closer to the dew point temperature of the indoor side air after heat exchange, thereby reducing the heat load of the heat source unit, Enhance its operating efficiency, achieve energy saving avoid waste heat emission.
    • A high value-added invention on powdered machining equipment for fish bone/scale

      Smart machinerynovel materials Innotech Expo A high value-added invention on powdered machining equipment for fish bone/scale

      This invention targets at value-added increase for fish bone/scale by-products through a series of manufacturing units of steaming, pressure/ temperature,drying. The core design of pressure/temperature in terms of powdered machining equipment consists of a high pressure chamber, heating components, superheated steam,operations experiments as well.
    • Oil water separation device

      Smart machinerynovel materials Innotech Expo Oil water separation device

      A catalytic thin film was deposited on a porous substrate by a liquid phase method for the synthesis of CNTs as a superhydrophobicsuperoleophilic membrane which is non-toxicenvironmental friendly. The filter membrane was installed on the oil-water separation device for operation without power it’s an important technology for recycling economyenvironmental protection.
    • Range hood with wisdom sensing

      Smart machinerynovel materials Innotech Expo Range hood with wisdom sensing

      The smoke removal device with smart detection has the capability of gas detectionindoor air circulation. The system is internally equipped with a sensing device. If an abnormal PM2.5 valuea high concentration of dangerous gas is detected, the fan can be automatically activated immediately to quickly filter the air,both preventivemonitoring functions can be achieved.
    • Self-powered fan-type dehumidifier

      Smart machinerynovel materials Innotech Expo Self-powered fan-type dehumidifier

      The anhydrous calcium chloride absorbs the water contents in the airturns them into liquid water. The liquid water then becomes the electrolyte to initiate the electrochemical reaction of the metal-air fuel cell. The electricity generated from the fuel cell is used to power the ventilation fan inside a wardrobe cabinetcreates its circulation with outside atmosphere.
    • Exhaust cabinet with air curtain isolation

      Smart machinerynovel materials Innotech Expo Exhaust cabinet with air curtain isolation

      The water two-phase change is used for energy conversion,the average air flow rate of the invention can be completely isolated as long as 0.2 m/sec, which can save 6RT freezing capacity equivalent to 6KW energy consumption compared with the conventional smoke exhausting cabinet body, effectively interacting with the outside world. Space isolation to avoid leakage of high pollution toxic gases
    • passive radiative cooling inorganic coating

      Smart machinerynovel materials Innotech Expo passive radiative cooling inorganic coating

      This technology uses the low-carbon geopolymer material & high emission powder to make the passive radiative cooling inorganic coating. Besides, all raw materials are from easily-gained oreindustrial by-products,the multi-color appearance is also developed. Notably, for decreasing the heat island effect, this coating is feasible to transmit heat into radiation that can be throughout t
本網站使用您的Cookie於優化網站。繼續瀏覽網站即表示您同意本公司隱私權政策,您可至隱私權政策了解詳細資訊。