進階篩選

Technical category
技術研發單位
    • Multifunctional liquid crystal smart cloud sensors

      AI & IOT Application FutureTech Multifunctional liquid crystal smart cloud sensors

      This technology is a new microarray chip sensing technology that integrates "organic light-emitting diodes", "liquid crystal chemical sensors" and "mobile communication system" into "multifunctional liquid crystal smart cloud sensors". The obtained signals are uploaded to the cloud for multi-dimensional analysis to achieve multiplex detection in one single sample. This sensor device is lightweight, low-cost, simple to operate, and the target-of-interest can be custom-made according to user needs.
    • SOLUTION PROPERTY SENSOR

      AI & IOT Application Innotech Expo SOLUTION PROPERTY SENSOR

      This multi-sensing system has pH range in 3 – 13temperature resistance of 2 Ω/°C. The conductivity part can clearly distinguish the conductivity of different liquids. This multi-sensor has good stabilitycan be applied to different water bodies in the future,combined with the cloud system, provides a intelligent detection methods.
    • Blowing type of Ketone gas sensor applied in healthy care

      National Applied Research Laboratories FutureTech Blowing type of Ketone gas sensor applied in healthy care

      This technology is used micro-electro-mechanical systems combined nanomaterials and micro-heater systems, because the interdisciplinary integrated manufacturing technologies are used to make miniaturized sensor elements, which are equipped with bluetooth functions of algorithms and detection devices to monitor the ketones gas concentration during patient breathing applied in healthy care.
    • Smart glove with soft force sensors for virtual reality somatosensory equipment training

      Smart machinerynovel materials FutureTech Smart glove with soft force sensors for virtual reality somatosensory equipment training

      The smart glove was made by soft force sensor with the multi-walled carbon nanotube cast in the mesh structurecombined with an interdigitated electrode together, then used AC/DC conversionspace calculation to establish the interactive virtual reality(VR) somatosensory system under the wireless. The recipient can achieve the same feedback as the demonstrator's behaviorskills in VR.
    • The electrochemical sensor for the quick detection of food freshness

      AI & IOT Application Innotech Expo The electrochemical sensor for the quick detection of food freshness

      The electrochemical sensor can detect bioaminesall amino acids without chemically labeling proceduresenzymatic catalysisbe capable of performing the measurement in pH-varied solutions . The electrodes can be modified with a specific membrane for the selective detection of histamineintegrated with a separation device to perform high selective detection of multi-analytes.
    • Multi-functional bio-sensor chip

      Medical Devices Innotech Expo Multi-functional bio-sensor chip

      The developed multi-functional bio-sensor chip has the advantages of excellent detection performance, wide application,low mass production. At present, we have already cooperated with upstreamdownstream manufacturers for mass production of the multifunctional bio-sensor chips. At the same time, cooperate with the instrument manufacturer to develop a simple portable electrochemical detect
    • Panchromatic CMOS TDI Image Sensor Design for Remote Sensing Satellite

      Electronic & Optoelectronics FutureTech Panchromatic CMOS TDI Image Sensor Design for Remote Sensing Satellite

      This project developed a CMOS Image Sensor (CIS) for the 2nd generation remote sensing satellite,its main achievement is to improve the ground resolution (also known as the Ground Sampling Distance, GSD) from 2 meters to sub-meter. The 12-cm large size chip of CMOS image sensor is implemented using Back-Side Illumination (BSI) CIS technology with mask stitching technologyutilizing the CMOS Time Delay Integration (CMOS TDI) technology in this design.
    • Breakthroughsachievements of key technologies of six-axis force/torque sensor

      Smart machinerynovel materials FutureTech Breakthroughsachievements of key technologies of six-axis force/torque sensor

      Multi-axis force/torque sensors are key components of precision machinesrobot arms. Development of the multi-axis force/torque sensor is a popular research topic in Taiwan. This research developed design methods, calibration machinescalibration algorithms for multi-axis force/torque sensors. These efforts contribute the enhancement of precision of 0.20 (1.25 times than commercialize pro
    • Wafer Level Probing System for Semiconductor Gas Sensor with High Throughput

      AI & IOT Application Innotech Expo Wafer Level Probing System for Semiconductor Gas Sensor with High Throughput

      This probing equipment is integrated by the opto-mechanical, electricalvacuum systematic technologies to efficiently measure the electric properties of gas sensor chips at wafer level. Therefore, we can identify the functionality of each sensor chip in early phasethen discard the unqualified chips to enhance the production efficiencyproducts competition.
    • AIoT smart aquaculture management systems

      AI & IOT Application FutureTech AIoT smart aquaculture management systems

      Our team construct an AIoT smart aquaculture management system. The management system mainly consists of: (1) Image Behavior MonitoringAnalysis Subsystem (2) Smart Feeding Subsystem (3) IOT Subsystem including underwater sensors, ROV,Drone (4) Cloud Subsystem (5) Big Data Analysis Subsystem.
    • Flexible PPG sensor patch

      Medical Devices FutureTech Flexible PPG sensor patch

      A flexible PPG sensor patch for measuring pulsations of blood vessels estimating ambulatory blood pressure monitoring (ABPM). The measured quality PPG signals are analyzed to estimate blood pressure (BP), heart rate (HR), blood oxygen (SpO2)atrial fibrillation (A-Fib)avoid motion artifacts. In this way, with subject’s physiological condition apprehended accurately.
    • Air quality index (AQI) gas sensor service platform

      AI & IOT Application FutureTech Air quality index (AQI) gas sensor service platform

      The optical detection device is fabricated based on the nitrogen dioxide absorbs the wavelength of light from 400nm to 550nm. The detection range, resolution and sensitivity are related to design of light path. The light signals can be received by the photodetector convert to concentrations of nitrogen dioxide which transfer to computer or mobile immediately.;The all-solid sulfur dioxide gas sensor developed by SSID team. The key technology is the special functionality of solid electrolyte and electrode materials, and then the layer material sequentially patterned design and planning. It can be used in high temperature and highly corrosive exhaust gas environment to achieve real-time monitoring of pollution emissions.;The 6'~8'MEMS technology service platform of TSRI was used to develop
    • Cardiovascular Disease Detection, AnalysisEvaluation System-On-ChipPlatform

      Smart machinerynovel materials FutureTech Cardiovascular Disease Detection, AnalysisEvaluation System-On-ChipPlatform

      The objective of this project is to develop a portablewireless urine detection systemplatform for prevention of cardiovascular disease. The main idea is to develop a system-on-chip, a microelectrodemicrochannel chip to detect biomarkers concentrations in urine. And then, it will be wirelessly transmitted to a smart application platform to evaluate user’s cardiovascular status.
    • Technology of anthropomorphic robotic armintelligent grasping

      Smart machinerynovel materials FutureTech Technology of anthropomorphic robotic armintelligent grasping

      Through patented wearable sensor fusion technology, human 3D motions can be captured in real-time which allow 7-DOF robotic armdexterous robotic hand to perform anthropomorphic motiongrasping action. Integrated with eye-in-hand visual module, the adaptive gripper can intelligently decide optimal grasping strategy to ensure success grasping of arbitrary shape of objects in smart manufacturing applications.
    • Development of cutting knowledge base to enhance machine tool performance

      Smart machinerynovel materials FutureTech Development of cutting knowledge base to enhance machine tool performance

      "Tool replacementtool life diagnosis" in smart manufacturing is a key link between the quality of workpiecethe efficiency of the manufacturing process, so it is an indicator of the operating efficiency of machine tools. This technology combines on-site monitoring data, laboratory analysisdeep learning to provide best tool selectionprocessing parameter combinations for
    • A Badminton Training and Activities Recognition System

      AI & IOT Application FutureTech A Badminton Training and Activities Recognition System

      The system consists of a racket sensor, a smartphone App, and the IoT shuttlecock serving machines. Data of the 3-axis inertial sensor will be sent to the smartphone via Bluetooth for analysis. The App can recognize 7 stroke activities, including clear, cut, drive, lob, rush, net play, and smash using machine learning algorithms, while the speed, force, and stroke times are recorded at the same time. The App also enables the user to set parameters of the serving machines for assigning shot placements and serving schedules.
    • Neuromorphic Intelligent Visual System for Low-Power Edge Devices

      AI & IOT Application FutureTech Neuromorphic Intelligent Visual System for Low-Power Edge Devices

      1.Low-Power Processing-in-sensor CMOS Image Sensor 2.Implementation of Low-PowerLow-Latency Deep Learning Chip based on Neuromorphic Intelligence (collaborated with MOST 108-2622-8-007-009) 3.Development of Neuromorphic Chip based on The Fruit Fly VisualSpatial Sensory Systems 4.Hardware-Software Co-Design for Neuromorphic AI Chips
    • IoT of food allergen detector system

      Medical Devices FutureTech IoT of food allergen detector system

      Our IoT of food allergen detection system has high sensitivityspecificity by magnetic nano-beads with advanced material coating. This advanced material successful inhibit biofouling in biosensor system. Other than this, Our system combine nanotechnology, biotechnology, IoTAI model. Device is small any easily carry to anywhere.
    • Vehicle LiDAR using CMOS Single-photon Detectors

      Smart machinerynovel materials FutureTech Vehicle LiDAR using CMOS Single-photon Detectors

      This project is used for advanced driver assistance systems (ADAS)automatic driving. At present, our project will use a more sensitive CMOS single photon detector array to reduce the number of photons required for detection to less than ten, in order to break through the cost barriers of applications of LiDARestablish low-cost, high-performance LiDAR modules.
    • Intelligent In Situ Monitoring of Membrane Fouling

      AI & IOT Application FutureTech Intelligent In Situ Monitoring of Membrane Fouling

      This technology uses in-situ optical photointerrupt sensorin-situ acoustic ultrasonic transducer to measure the growth of fouling layer thickness during membrane water treatment. Being the world’s first to combine real-time filter speed attenuation dataphysical mode of clogging, the clogging of film can be instantly analyzed in a smart way which in turn effectively extends its lifetime. T
    • A Manual CentrifugePaper Devices for Point-of-Care Diagnosis

      Precision Health Ecosystem FutureTech A Manual CentrifugePaper Devices for Point-of-Care Diagnosis

      Here, we introduce an electricity-free centrifuge platform based on a manual centrifuge. The provided centrifugal force is sufficient to produce a plasma purity of 99 separated in as little as 2−3 min. We then performed an immunoassay on a paper devicethe results were observed by a portable reader. As a result, the detection limit of the C-Reactive Protein is 1 ng/mL, with a total turnaround time of 7 min.
    • Efficiency Boosting System for Computer Numerical Control Milling Machine Based on AIBig Data Analytics

      AI & IOT Application FutureTech Efficiency Boosting System for Computer Numerical Control Milling Machine Based on AIBig Data Analytics

      This technique combines more than one AI models to precisely predict current under noisy data from current sensoroptimizes speed rate based on this AI forecasting model. At the same time, it considers the practical requirementslimitations of workpiece surface roughness, tool machine current load, etc. This technique provides decision supports for optimizing parameters of CNC milling machine to keep high efficiencyenhance energy conservation.
    • A Secure IoT Communication Technique with Ultra Low Power Wake-Up Scheme

      AI & IOT Application FutureTech A Secure IoT Communication Technique with Ultra Low Power Wake-Up Scheme

      This work presents a low powersecure IoT communication scheme. A physical unclonable function (PUF) based mutual authentication scheme in conjunction with a trusted third party (TTP),the low power transceiver with secure wake-up mechanism are integrated for networkhardware security thereby enabling to extend the battery lifetimeensuring reliability for the IoT systems.
  • 1
本網站使用您的Cookie於優化網站。繼續瀏覽網站即表示您同意本公司隱私權政策,您可至隱私權政策了解詳細資訊。